Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Impact Windows Across Kendall
Impact windows in Kendall typically run $800 to $1,500 per window installed, depending on opening size and frame material, with whole-home packages starting around $8,000. If your home sits west of the Turnpike near Bent Tree or east toward Dadeland, you’re in the Miami-Dade High Velocity Hurricane Zone, which means every window we install must carry a Miami-Dade Notice of Acceptance, not just a standard Florida Product Approval. That local code requirement is where a lot of Kendall projects go sideways with the wrong contractor. We get it right the first time. Call (863) 946-5039 to schedule your free in-home measure, and Ed Winslow’s crew will walk you through exactly what your house needs.
Why Winslow Windows & Doors Is Kendall’s Preferred Impact Windows Company
Ed Winslow has been installing impact-rated windows and doors across South Florida since 2011, and Kendall’s particular housing stock is one we know block by block. The concrete-block ranch homes off Kendall Drive and the townhome clusters around Hammocks Boulevard share a common story: original single-pane aluminum frames from the 1970s and 1980s, corroded jambs, and no hurricane rating to speak of. We have pulled and replaced enough of those units to know what hides behind the drywall before we even open the wall.
Our Impact Windows team handles Kendall calls directly. When a homeowner near West Kendall District Park calls, a live person picks up – 24 hours a day, no voicemail loop. Every technician who arrives is background-checked and in uniform, and the truck says Winslow on the side. That accountability is not marketing language. It is how Ed runs the business. The 36500-Day Done Right Promise backs every install: if it is not done right, we make it right, period. No ticket number, no runaround, no national-chain shrug.
Our Impact Windows Services in Kendall
Full-Frame Impact Window Replacement
Most Kendall homes built before 1992 need full-frame replacement, not insert retrofits. The original aluminum tracks on those single-pane sliders and jalousies have oxidized badly in the humidity, and pushing a new impact unit into a corroded frame does not satisfy HVHZ water-tightness requirements. We remove the entire old frame down to the rough opening, inspect and repair the concrete-block buck, and install a fully flashed, anchored impact window that meets Miami-Dade NOA standards for your specific opening size.
Miami-Dade NOA Product Specification
This is where Kendall differs from every city north of the county line. Before we order a single unit, we look up the product approval in the Miami-Dade database to confirm the NOA covers the exact size, configuration, and design pressure of each opening. A window approved under the Florida Building Code but lacking a Miami-Dade NOA will fail final inspection in Kendall. We catch that before you pay for it, not after.
HVHZ Permit and Inspection Assistance
Kendall permits are not a formality. We pull the permit, schedule the inspections, and stay on site until the inspector signs off. Homeowners who have been through Miami-Dade inspections know the difference between a crew that knows the inspector’s checklist and one that hopes for the best. Our jobs pass the first time because the product approval, design pressure, and installation details are verified before the truck leaves the shop.
Impact Sliding Glass and Patio Doors
Lakeside homes and canal-front properties around Kendall’s residential lakes pair impact windows with impact sliding doors more than any other upgrade combination. Wind-driven debris hits large glass openings hardest, and a sliding door without an NOA-rated impact rating is the weakest point on the back of the house. We install impact-rated sliders and French doors rated to the same HVHZ wind loads as the windows on the front elevation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kendall
We install and service impact products from PGT, CGI, and ES Windows, and as an authorized installer for all three, we have direct access to factory support and parts in South Florida. That means when a Kendall customer near Country Walk needs a replacement sash or a new NOA sticker after a renovation, we are not routing through a distributor in another state. We also install CWS impact windows for homeowners who want a premium architectural look. Every brand we carry has configurations with laminated glass interlayers and design pressure ratings matched to Kendall’s wind zone and opening sizes.
Common Impact Windows Problems We See in Kendall Homes
- Spec’ing Florida Product Approval instead of Miami-Dade NOA. This is the single biggest avoidable failure we see in Kendall. A contractor orders windows that meet statewide code, but Kendall’s HVHZ designation requires NOA-listed products. The inspection fails, the homeowner waits another 4-6 weeks for reordered units, and the contractor often disappears.
- Insert retrofits over oxidized pre-1992 aluminum frames. A new impact window installed into a corroded aluminum track looks fine on day one. Under wind-driven rain, the old frame leaks at the corners and the seal fails. Kendall’s afternoon humidity cycles accelerate that hidden corrosion every year it stays in place.
- Skipping wind mitigation documentation. Homeowners who install impact windows but never submit the wind mitigation inspection form to their insurer leave premium credits on the table. The insurance company has no record of the upgrade, and the policy gets surcharged as if the windows were still original.
- Undersized design pressure for the opening. A large picture window on the second floor of a two-story Kendall home carries a different design pressure requirement than a small bedroom window on grade. A cheap quote often uses one generic unit spec for every opening, and the inspector catches it at final.
Pricing for Impact Windows in Kendall, FL
A standard impact window in Kendall runs $800 to $1,500 per opening installed. Single-hung impact windows start around $900 and go up to $1,800 for larger sizes or heavier frame materials. Large or custom openings, like a picture window overlooking a lake or an arched window in an older Dadeland-area home, run $2,500 to $5,000 each. Whole-home packages for a typical three-bedroom CBS ranch in Kendall land between $8,000 and $25,000, depending on opening count, frame material, and whether you are also replacing sliding doors.
What moves the price in Kendall specifically: opening count, design pressure required for the elevation, floor height, and whether the existing frame needs full replacement versus a clean insert. We give you a written, line-item quote before any work starts. Call (863) 946-5039 for a free in-home measure and exact numbers, not a range.
What Impact Windows Costs in Kendall
Impact windows generally fall between $800 and $1,500 per window installed in Kendall. Impact single-hung units run $900 to $1,800, large or custom openings $2,500 to $5,000, and whole-home packages $8,000 to $25,000 or more. The variables are specific to your house: how many openings face the prevailing wind, whether you are on a lake or canal, how high the windows sit, and whether you choose aluminum or vinyl frames. Full-frame replacement costs more than inserts because we remove the old frame, repair the buck, and re-flash the opening before the new unit goes in. The free in-home measure and written quote are how we remove the guesswork. You will know the exact number before you sign anything.
Be careful with a quote that comes in far below this range. If a Kendall contractor offers impact windows for $500 apiece, you are almost certainly looking at Florida Product Approval units without Miami-Dade NOAs, or insert retrofits over corroded aluminum, or both. You will pay for that mistake at inspection.
Florida Pays You Back
The incentives stack if you document the work properly. My Safe Florida Home offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, and impact windows count. Florida exempts impact-resistant windows and doors from sales tax. The federal 25C energy credit returns 30% of product cost up to $600 per year on qualifying energy-efficient units. And after a wind-mitigation inspection, Kendall homeowners typically see windstorm premium credits averaging around 25% on the windstorm portion of their policy. The inspection runs $75 to $150. Programs and carrier decisions set the final numbers, so we do not promise an exact credit, but we do hand you the documentation your insurer needs to evaluate it.
We Also Serve Cities Near Kendall
Our crews cover all of Kendall and the surrounding South Miami-Dade area, including Miami, Hialeah, Miami Beach, and Coral Gables. Every one of those cities sits in the same HVHZ wind zone, so the same NOA compliance standard applies across the board. If you are just outside Kendall and need a crew that already knows your inspector’s checklist, call (863) 946-5039.
Serving Kendall, FL - Our Local Coverage Area
We’re based in the Kendall area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows in Kendall
Miami-Dade NOA approval is required for every impact window installed in Kendall. Florida Product Approval alone will fail final inspection. Kendall lies entirely within the Miami-Dade High Velocity Hurricane Zone, and the county enforces the NOA requirement on every replacement window and door. Call (863) 946-5039 before you buy anything, and we will verify the product approval for your specific openings for free.
You need the Miami-Dade NOA documentation for each installed unit, a completed wind mitigation inspection form, and the permit with final inspection sign-off. We provide all three after every install and can refer you to a licensed wind mitigation inspector who knows Miami-Dade’s requirements. Call (863) 946-5039 and we will walk you through the exact paperwork for your house.
Older Kendall homes built before 1992 have original single-pane aluminum frames that have corroded in the humidity, and inserting an impact unit into that oxidized track leaves a water-tightness failure under wind-driven rain. Full-frame replacement removes the corroded frame, repairs the concrete-block buck, and installs the new unit with proper flashing. Call (863) 946-5039 and we will tell you honestly whether your frames can take inserts or need full replacement.
Design pressure ratings for a single-story CBS home in Kendall typically run between +/-50 and +/-75 PSF depending on the opening size and elevation, and every unit must carry a Miami-Dade NOA matched to that exact configuration. We verify the required design pressure for each opening before ordering, so the window meets code for the specific location in the wall, not just a generic Miami-Dade standard. Call (863) 946-5039 for an exact spec on your home.
A compliant Kendall quote with Miami-Dade NOA units and full-frame replacement runs $800 to $1,500 per window, while a cheap quote using Florida Product Approval units or insert retrofits might come in $200 to $400 lower per opening. The cheap quote fails inspection, triggers reorders, and leaves you paying for the same job twice. Call (863) 946-5039 for a written line-item quote that will pass inspection the first time.
Our crews do real damage control on Kendall homes where the first contractor ordered the wrong product. In the Bent Tree community, we pulled a full-frame replacement on a 1974 CBS ranch whose original single-pane aluminum sliders had corroded jambs and zero HVHZ rating. The homeowner’s prior contractor had ordered Florida Product Approval units that would have failed Miami-Dade inspection. We installed PGT 7700 impact-rated casements with laminated glass interlayers and Miami-Dade NOA stickers, and the final inspection passed on the first try. That is the difference between knowing Kendall’s code and guessing at it.
The choice Kendall homeowners face is not impact windows versus shutters. Shutters sit in a pile in the garage until the storm arrives, and then someone has to hang them in the wind and rain. Impact windows are always on the job, protecting the house year-round from UV, humidity, and debris. A licensed impact specialist with Miami-Dade NOA expertise will outlast any big-box install crew when the inspector shows up. That is what we do.
Ed’s name is on the door, and on every job we do in Kendall. Call (863) 946-5039 today for your free estimate, and you will talk to a real person who knows this city’s code, this city’s homes, and exactly what your windows need.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Kendall and South Florida since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.