Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
PGT Window Installation: The Miami Owner’s Guide
PGT window installation in Miami typically runs $85 to $220 per window for labor when the opening is already prepped and the old unit is out, with full replacement projects – including the window itself, flashing, and trim work – landing between $650 and $1,900 per opening depending on size and series. We stock PGT-compatible hardware, balances, weatherstripping, and lock mechanisms on our trucks, so most installation and re-installation calls are handled same-day. Most Miami homeowners call us after a window won’t stay open, a lock stops throwing, or they notice daylight peeking around the frame after a storm – and they need someone who actually knows PGT’s lineup instead of guessing.
Key Takeaways:
- We install and re-install PGT windows across Miami, including 700 Series, 7700 Series, WinGuard, and Premier Lines.
- Labor-only re-installation of an existing PGT window runs $85 to $220 per opening in Miami; full replacement starts around $650 per window.
- We’re an independent Miami installer, not a PGT subsidiary – which means we’ll tell you when an aftermarket part makes more sense than OEM.
- Every job carries the 36500-Day Done Right Promise and Ed Winslow’s direct accountability.
Which PGT Models This Applies To
PGT’s Miami footprint is dominated by the WinGuard and Premier line families, and we work on all of them – plus the builder-grade 700 and 7700 Series you’ll see in older Miami-Dade homes. Here’s what actually matters when matching a part to your window: the frame label printed on the top edge of the sash or the head jamb, which gives you the series, glass package, and manufacturing date. Without that label, we match by measuring the sash thickness and checking the corner construction – PGT uses a flush-glazed pocket design on impact-rated models that aftermarket hardware has to be sized for carefully, and we’ve seen the wrong balance shoe cause a sash to slam shut on a WinGuard single-hung. In Florida’s salt air and humidity, an honest independent installer will recommend OEM for structural hardware like balance systems and locks, while a name-brand aftermarket weatherstripping is often the smarter money – it wears out anyway, and the cost difference is real.
Signs Your PGT Window Installation Is Failing
- The sash won’t stay up on a single-hung or double-hung. The block-and-tackle balance system has lost tension or the shoe broke – extremely common after years of Miami’s heat cycling the nylon components.
- You can hear street noise or feel air moving around the closed window. The weatherstripping has compressed or the frame has shifted out of square, breaking the seal that was factory-set.
- Condensation builds up between the glass panes. The sealed unit has failed. This means the window’s insulating gas escaped and Miami’s humidity got in – the fix is a new insulated glass unit, not a gasket.
- The lock won’t throw or the handle feels loose and sloppy. PGT’s cam-action locks wear at the strike plate after years of use, especially if the sash was ever forced against a warped frame.
- You see gaps or cracks in the caulk line around the exterior frame. Miami’s UV beats up sealants faster than almost anywhere in the country, and water intrusion through those cracks starts eroding the rough opening before you’d ever notice it from inside.
Replacement Cost & What’s Included
Here’s what Miami homeowners can expect to pay, based on the work we do across the county:
- Re-installation of an existing PGT window (sash removed, hardware replaced or reset, sealed and reinstalled): $85 to $220 per opening
- Balance system replacement (both sides, OEM-specified for PGT): $110 to $260 per sash
- Weatherstripping replacement (full perimeter, PGT-compatible): $60 to $140 per window
- Lock and hardware replacement (OEM PGT hardware): $70 to $180 per window
- Full PGT window replacement (new impact-rated unit, tear-out, installation, trim, and flashing): $650 to $1,900 per opening, with size and series driving the range
Every quote is a written line-item price before we start – no change orders, no “we found something else” surprises on the invoice. Our 36500-Day Done Right Promise covers the workmanship, and we pull permits and pass inspections on every installation Miami code requires. Ed’s name is on the door – and on every job we do.
DIY or Call Us?
You can safely check a few things yourself: confirm the model label on your PGT sash, test whether the window rocks in its frame when pushed from inside, and look for visible gaps in exterior caulk beads. But when it comes to re-setting a PGT sash, replacing balance systems, or re-squaring a frame, you’re getting into trade territory – impact-rated windows carry glass units that weigh enough to do serious damage if a balance spring lets go, and the corner welds on PGT frames need a specific technique to support properly. We’d rather you not learn that lesson the hard way. If you want someone in Miami who’s installed and re-hung PGT windows for years and will give you an honest answer about whether a part can be rebuilt or needs replacing, call us at (863) 946-5039.
FAQs
A properly installed PGT impact window in Miami lasts 20 to 30 years, but the hardware and weatherstripping have a much shorter service life – balances typically fail at the 10-to-15-year mark, and weatherstripping gives out every 5 to 8 years in our salt air and sun. Call (863) 946-5039 if your windows are in that service-life window and we’ll tell you straight whether you’re looking at a part replacement or a full window swap.
Yes, if the frame is square and the failure is hardware – balances, locks, weatherstripping, or even a sash re-bedding – we repair it in place for a fraction of replacement cost; if the insulated glass unit has failed or the frame has extensive corrosion, replacement is the honest call. The fastest way to know is a free estimate from us.
Re-installing an existing PGT window with new hardware takes 45 to 90 minutes per opening once we’re on site, and a full replacement – including tear-out, flashing, installation, and interior trim – takes 3 to 6 hours per window. For an exact timeline on your project, call (863) 946-5039 and we’ll walk you through what to expect.
Yes – our trucks carry PGT-compatible balance systems, weatherstripping, locks, and cam hardware sized for the most common PGT series across Miami, which is why most repair and re-installation calls are completed on the first visit. If your model requires oddball hardware we don’t stock, we order it and schedule the return trip before we leave your driveway.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Miami and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After