Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterPGT Custom & Geometric Windows in Miami: What to Know First
PGT custom and geometric windows in Miami generally run $900 to $2,800 per opening for impact-rated shapes like arches, trapezoids, and radius configurations, installed by an independent local crew. We typically complete a custom PGT window replacement in Miami within two to three weeks from measurement to final inspection, depending on shape complexity and permit turnaround. You don’t pay more for the quote, and you’ll get an exact line-item price before anything gets ordered.
This page is for Miami homeowners who have PGT windows that are failing, or who want custom shapes that match PGT’s existing product lines, and need someone who actually knows how these windows behave in South Florida humidity and storm conditions. Call (863) 946-5039 and a live person answers, day or night.
How PGT Products Fail - and How We Fix Them
As an independent PGT service provider, we see the same failure patterns repeat across Miami neighborhoods from Kendall to Coral Gables. Not every PGT window fails the same way, and custom shapes create unique stress points. Here’s what we encounter most:
- WinGuard aluminum frame seal separation on radius tops. PGT’s WinGuard line uses a structural adhesive at the mitered corners of arched and radius frames. After years of Miami sun loading and frame expansion, that bond breaks down at the apex of the arch first. Water wicks in, you get peeling paint and eventually drywall staining below the window. We disassemble the corner joint, clean the mating surfaces, reapply a marine-grade structural adhesive, and refasten with corrosion-resistant screws, then reseal the exterior bead.
- IGU fogging in oversized fixed trapezoids from the 7900 series. PGT’s 7900 impact line carries large fixed trapezoid and parallelogram lites. The insulated glass units in these oversized shapes fail at the secondary seal when the window spans more than 40 inches on the short leg and the top of the lite bakes in direct exposure. You’ll see haze or water droplets inside the glass that never dry. The fix is replacing the IGU with a new PGT-spec unit, not the whole frame. We measure the exact shape, order the replacement, and reseat it with the correct setting blocks - many Miami installers skip the setting blocks on odd shapes and the glass sags over time.
- Cracked casement seals on shaped windows in storm surge zones. PGT casement windows with angled or clipped corners near the coast in Miami Beach and Key Biscayne take salt spray constantly. The outer rubber gasket dries and cracks within five to seven years in that environment, faster than PGT’s inland life expectancy. You’ll feel air moving around the sash even when it’s locked. We replace the weatherstripping with OEM-profile material, and we inspect the hinge hardware for corrosion while we’re there. Brine will eat standard hardware, and on shaped casements the hinge carries more load than a square window.
- Deflection and racking in custom mullion assemblies. When a Miami homeowner builds an oversized opening with three or more PGT units mulled together, including a radius transom, the mullion joints flex with thermal cycling. Over a decade, that flex loosens the factory mullion fasteners and you get water intrusion at the joint, not at the glass. We reset the mullions, replace worn gaskets with new PGT-profile material, and re-torque every fastener. If the original install used the wrong mullion reinforcement for the span, we correct it and pull a permit so the city inspector signs off.
- Operable hardware wear on Custom Impact hinged shapes. PGT hinged patio doors and shaped casement units in high-use areas - think a pool-facing arched casement in Pinecrest that gets opened daily - wear down the multi-point lock mechanism. You’ll notice the handle takes more force, or the lock posts won’t seat cleanly. We rebuild or replace the hardware with PGT-compatible components, and we align the sash properly rather than forcing the lock to do the work. A lock that’s fighting the frame is a lock that fails during the next storm.
Our PGT Custom & Geometric Windows Process
We don’t guess on shaped windows. Everything follows a sequence that catches problems before you sign anything:
- 1
On-site measurement and frame inspection. We visit the home, measure the rough opening in three dimensions, and check the condition of the existing frame, lintel, and sheathing. For arched or radius openings, we create a full-size template on heavy paper, not just a length-width-height note. That template is what gets the new window bent or machined to the exact curve.
- 2
Parts decision: OEM vs. aftermarket. If the existing window can stay in the frame, we discuss what components need replacing and whether to use PGT-factory parts or a quality aftermarket equivalent that matches the original profile. For warranty-critical repairs, we go OEM. For older PGT units where factory parts are discontinued, we source compatible profiles from our supplier network and tell you up front what’s going in.
- 3
Permit pull and product order. We handle the Miami-Dade or incorporated-city permit for the replacement, because shaped windows are structural, not decorative. If the window is impact-rated, the product order and the permit paperwork have to line up. We’re used to that dance.
- 4
Removal and dry-fit. We remove the old window carefully enough that your drywall and stucco don’t get torn up around the opening. The new shape goes in dry first, we check level and plane on every axis, then we shim and set it properly before any fastener goes in.
- 5
Sealing, flashing, and interior trim. We use a flashing system that moves water out of the wall, not one that just covers the gap. After the exterior is done, we finish the interior so it looks like the window was always there.
- 6
Cycle test, seal test, cleanup. Every operable unit gets opened and closed a minimum of twenty times. We run a water test on custom shapes that sit under roof overhangs or deck ledges where splash-back is common. Then we sweep, haul, and walk you through what we did and why.
Every one of these steps is backed by the 36500-Day Done Right Promise. If it’s not done right, Ed makes it right. Period.
What PGT Custom & Geometric Windows Costs in Miami
You should know the honest price ranges before anyone walks your home, because shaped windows cost more than rectangles and anyone who tells you otherwise is padding the quote or not planning to do the job right:
- Fixed arched or radius PGT impact window, 36″ to 60″ wide: $1,100 to $2,400 installed, depending on frame finish and glass package.
- Operable half-round or geometric casement with impact glass: $1,600 to $3,200 installed.
- Trapezoid or angled fixed lite with impact glass, under 20 sq ft: $900 to $1,900 installed.
- Oversized custom mulled assembly with radius transom (three-plus units): $4,500 to $9,000 installed, permit and engineering included.
- IGU replacement in an existing PGT frame (no full window swap): $500 to $1,100 depending on shape and glass type.
What moves the price: the number of radius or angle cuts, whether the unit is operable, the finish on the frame, and whether Miami-Dade NOA paperwork is required for the product. Call (863) 946-5039 for an exact quote on your specific opening. Estimates are free, and we’ll tell you if a repair makes more sense than a replacement.
Why Miami Homeowners Call Winslow Windows & Doors for PGT Work
Ed Winslow grew up in Hialeah, learned glazing and construction at Miami Dade College’s building trades program, and spent years on Miami-Dade installs before he put his own name on a truck. That’s not a marketing line; it’s what happened. When someone calls us about a PGT window that’s sweating or a radius unit that’s pulling away from the stucco, the person on the phone actually knows what that failure looks like. We answer live, 24/7, and the technician at your door is background-checked and in uniform. If the PGT product can’t be saved, we’ll tell you straight and we can quote CGI, CWS, ES Windows, or ECO Window Systems as alternatives from our authorized lineup.
Upfront pricing. No surprises on the invoice. And if it’s not done right, we come back. That’s the promise. My name is on the door - literally. That’s all the guarantee you should need.
FAQs
We’re an independent PGT service provider, not an authorized PGT warranty station, so if the window itself falls under PGT’s published warranty you’ll want to file that claim with PGT directly. We can inspect the unit, document the failure, photograph the serial and glass etching, and provide a written report you can submit to PGT for warranty evaluation. If the claim gets denied or the unit is out of warranty, we handle the repair or replacement ourselves and show you the cost before any work begins.
Most current PGT custom shape components like mullion gaskets, setting blocks, and hinged casement hardware are available through our supplier channels in South Florida. Some older PGT WinGuard profiles that were discontinued years ago are harder to source, especially radius-specific gaskets and corner keys. When factory parts are no longer made, we match the profile with a compatible aftermarket component and tell you what’s going in before we order it. Call (863) 946-5039 and we’ll check availability for your specific PGT series while you’re on the phone.
For IGU fogging, seal failure, or hardware wear on a PGT frame that’s still structurally sound, repair is almost always cheaper, typically half or less than a full replacement. The break point is when the frame has corrosion at the mullions, the lite is cracked rather than hazed, or the original opening was flashed wrong and the surrounding wall has water damage. At that point, replacement pays for itself. We’ll show you both numbers and give an honest recommendation.
A simple trapezoid or fixed radius IGU replacement in an existing PGT frame can be done in under two weeks, including lead time on the glass. A full custom-shaped window replacement, especially something like a mulled assembly with a radius transom, typically takes two to four weeks because of permit, engineering, and product lead times. We’ll give you a written schedule on the estimate so you’re not guessing.
Yes. Shaped and oversized windows are structural, and Miami-Dade has specific product approval and inspection requirements for impact-rated units. We pull the permit, we arrange the inspection, and we don’t finish interior trim until the inspector has signed off. No permitless work, no exceptions.
If you need a trained eye on your PGT custom or geometric windows in Miami, call (863) 946-5039 today. A live person answers, the estimate is free, and you’ll get a straight answer about whether to repair or replace. The one down the road.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Miami and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.