Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTrusted Shingle, Tile & Metal Roofing for Miami Homeowners
Shingle, Tile & Metal Roofing in Miami typically runs $12,000 to $38,000 depending on material, pitch, and square footage, and a full tear-off usually takes 3 to 7 working days once permits clear. Shingle, tile, and metal each solve a different South Florida problem: shingles keep upfront cost low, tile handles the brutal UV and salt air, and metal shrugs off hurricane season better than anything else on the market. Winslow Windows & Doors has been doing this work in Miami since 2011, with Ed Winslow’s name on every contract and a live person answering the phone at (863) 946-5039 any hour you call.
What Our Shingle, Tile & Metal Roofing Service Includes
Shingle Roofing
Architectural asphalt shingles remain the most common roofing choice in Miami neighborhoods like Kendall and Cutler Bay because they deliver solid protection at a price that doesn’t gut a renovation budget. We install full shingle roof systems, which means the shingles themselves plus the underlayment, drip edge, flashing, and ridge vents that determine whether the roof actually lasts 25 to 30 years or starts failing at year 8. Our crews inspect the decking beneath before a single bundle gets opened, so you’re not paying for a new roof stapled to rotting plywood. Ed’s standard on shingle work is simple: nail pattern per manufacturer spec, synthetic underlayment instead of builder-grade felt, and a watertight valley every single time.
Tile Roofing
Coral Gables Shingle, Tile & Metal Roofing projects often involve concrete and clay tile roofs, which dominate the look of Palmetto Bay and older Miami neighborhoods too, and for good reason: a properly installed tile roof can last 50 years or more, even with the salt air blowing in off Biscayne Bay. The failure point on tile roofs is rarely the tile itself, it’s the underlayment beneath it, which Miami’s heat and humidity break down far faster than most national roofers expect. We specialize in full tile roof replacement including new battens, new underlayment, and reusing salvageable tile where it makes sense to keep your cost down. Tile work also means dealing with weight, so we verify the existing truss and deck structure can handle the load before we quote, not after the old roof is already in the dumpster.
Metal Roofing
Standing seam and metal panel roofs have gone from rare to routine across Doral and Aventura because Miami-Dade’s high-velocity hurricane zone demands impact ratings that metal achieves more easily than almost any other material. A properly installed metal roof carries a 140 mph wind rating, and the interlocking panel system means there are far fewer exposed fasteners and seams where wind-driven rain could find its way in. We work with both exposed-fastener metal panels for budget-conscious homeowners and true standing seam systems where the fasteners stay hidden under the panel, priced accordingly. Metal also means noise and thermal expansion are real considerations, so we don’t skip the insulation and clip details that separate a metal roof that performs from one that pops and rattles during every afternoon thunderstorm.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Shingle, Tile & Metal Roofing
Most Miami homeowners don’t spend their weekends researching shingle brands, so let us make it simple. We install and service PGT roofing systems, and if you know PGT, you know they built their reputation on impact-rated everything. It’s the same company whose windows and doors protect homes from Category 5 wind, and their roofing products carry that same engineering DNA. When a customer in Homestead asks what brand we’re putting on their roof, PGT is the answer for shingle work more often than not.
For metal and tile systems, we also work extensively with CGI and CWS products. CGI is another Florida impact-rating powerhouse, and their metal panels are engineered to handle the exact conditions we get in Miami: high humidity, salt exposure, and wind-driven rain that finds every seam on a lesser roof. CWS offers tile and shingle options that balance cost against performance for homeowners who want a solid roof without a top-shelf price tag. Whether you have one of those brands, ViewLux, or something else entirely, we’ll assess it the same way: honestly, with a written line-item quote, and with Ed’s word that it’s done right or we make it right.
Signs You Need Shingle, Tile & Metal Roofing Right Now
- Granules in your gutters or downspouts after a storm. Asphalt shingles shed granules constantly as they age, but when you see visible accumulations after a heavy Miami downpour, it means the protective top layer has worn through and the asphalt beneath is degrading fast. Left alone, that roof goes from repairable to full replacement in one season.
- Water stains on ceilings or walls following a rain event. A stain means water has already penetrated the roof, the underlayment, and the decking. In Miami’s humidity, that moisture becomes mold and rot in a matter of weeks, not months, and the longer you wait, the more structural repair gets added to the roofing bill.
- Cracked, slipped, or missing tiles after high winds. Tile roofs can look fine from the street while individual tiles have shifted out of position, exposing the underlayment beneath. One shifted tile might be a quick fix, but when you see multiple slipped tiles across multiple roof planes, the attachment system is failing and needs a professional inspection.
- Rust streaks or loose fasteners on a metal roof. Exposed-fastener metal roofs wear out first at the grommets and washers around each screw, especially within a mile or two of the coast where salt air accelerates corrosion. Rust streaks running downhill from any fastener line means the seal has failed and moisture is working its way underneath.
- Sagging deck lines or daylight visible from the attic. This is the one that can’t wait. If you can see the roofline dipping between trusses or if you look up in the attic and see actual light coming through, the structural decking is compromised. That’s not a material issue, it’s a safety issue, and it needs a professional assessment before the next storm loads the roof with 60 mph gusts.
If you’re seeing any of these, call us at (863) 946-5039. We’ll send a background-checked, uniformed technician out with no trip charge anywhere in our home county to tell you honestly whether you need a repair or a full replacement.
Our Shingle, Tile & Metal Roofing Process - Step by Step
- 1
The inspection and honest assessment. We start on the roof, not at the kitchen table with a pitch book. Our technician examines the current roof’s condition, identifies the failure points, and checks the attic ventilation and decking from underneath. You get a written report with photos showing what we found, whether or not we recommend replacement, and if we do, exactly why.
- 2
The written quote with zero guesswork. After the inspection, we put together a line-item quote that breaks down materials, labor, tear-off, disposal, and any structural repairs the decking needs. Miami homeowners have seen too many quotes that balloon after demo day; ours carry fixed pricing with no change orders unless you ask for something different mid-project. We also offer a free second opinion on any written estimate you’ve received from another contractor.
- 3
Permits, materials, and scheduling. Miami-Dade has some of the strictest roofing codes in the country, and we handle the permit process start to finish. That includes the HVHZ compliance documentation for high-velocity hurricane zones and the 25% re-roofing rule when it applies. Materials get ordered only after the permit is approved, so you’re not storing shingles or panels in your driveway for a month.
- 4
Installation day and the daily check-in. Our crews arrive in uniform, every person background-checked, and the site lead walks you through what’s happening each day before work starts. Tear-off, deck inspection, underlayment, and installation happen in sequence, and we don’t rush the underlayment just because it’s a sunny day. In Miami, the afternoon thunderstorm is always one hour away, and we build accordingly.
- 5
Final walkthrough and the Done Right Promise. Once the last tile is set or the final panel is fastened, we walk the entire roof with you, check the flashing points, verify the ridge vents, and make sure the site is clean. Then Ed’s 36500-Day Done Right Promise goes into effect. If anything isn’t right, we come back and make it right. That’s 100 years of accountability, and it backs every roof we install in Miami.
How Much Does Shingle, Tile & Metal Roofing Cost in Miami?
A full shingle roof replacement in Miami averages $12,000 to $22,000 for a typical 1,800 to 2,500 square foot home, with architectural shingles landing at the higher end and 3-tab rarely recommended given our wind zone. Tile roof replacement runs $25,000 to $38,000 depending on whether you’re using new tile or reusing existing pieces, and metal roofing spans $18,000 to $35,000 with standing seam at the top of that range and exposed-fastener panels at the bottom. Those prices include tear-off, new underlayment, flashing, and haul-off, but not structural decking repair if we find rot only after the old roof is off.
What moves the number? Roof pitch, number of roof planes, tile profile, metal gauge and panel width, and whether your home sits in a flood or wind zone that triggers additional code requirements. The best way to stop overpaying is to never accept a quote that doesn’t separate materials, labor, and structural work into line items. Every quote we give includes a full breakdown, a written scope of work, and the labor warranty in writing. Call (863) 946-5039 and we’ll schedule a free inspection and free estimate, no obligation, no trip charge inside our home county, and a senior or veteran discount of 10% applied automatically if you qualify.
Shingle, Tile & Metal Roofing Near Miami - Our Service Area
We serve Miami proper along with Shingle, Tile & Metal Roofing in Hialeah, Shingle, Tile & Metal Roofing in Miami Beach, Coral Gables, Doral, Miami Gardens, North Miami, Kendall, Cutler Bay, Aventura, Palmetto Bay, and Homestead. Typical lead time for inspection is next day, and we answer the phone live at (863) 946-5039 whether you call during business hours or at 2 a.m. ahead of a storm. We’re home, and we’ve been the one down the road in Miami since 2011.
Serving Miami, FL - Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Shingle, Tile & Metal Roofing in Miami
Shingle, Tile & Metal Roofing in Miami Beach follows the same patterns as the mainland: these three are the most common residential roof system types installed here. Shingle roofing uses asphalt-based interlocking units, tile roofing uses concrete or clay profiles paired with an underlayment system, and metal roofing uses steel or aluminum panels, either standing seam or exposed fastener. Each has different price points, lifespans, and wind ratings, and the South Florida climate favors tile and metal for longevity while shingles remain the default for budget-driven replacements.
Most full roof replacements in Miami take 3 to 7 working days from start to finish, with shingle roofs on the shorter end and tile or metal installations taking longer due to more complex attachment systems. The wildcard is the permit review, which can add one to three weeks depending on the municipality and current load at the building department. We’ll give you a firm schedule before we start, and we’ll call you if weather or inspection timing changes anything.
Our Shingle, Tile & Metal Roofing in Hialeah and across Miami typically runs $12,000 to $38,000 depending on material: shingles at the low end, metal in the middle, and full tile replacement at the high end. The final number depends on roof size, pitch, number of planes, structural decking condition, and whether your property sits in an HVHZ zone. Every free estimate from us includes a written line-item breakdown, so you know exactly what you’re paying for before any work starts. Call (863) 946-5039 for an exact quote.
Yes, we install and service PGT, CGI, and CWS roofing systems, plus ViewLux and other major brands. Our crews follow manufacturer installation specifications exactly, which is the only way a manufacturer warranty stays valid. If you’re not sure what brand is on your roof, we’ll identify it during our inspection and tell you what’s still under warranty and what’s not.
If you’ve got a leak after a storm or a section of roof that has failed and is letting water in, call us at (863) 946-5039 and we’ll get a technician out to assess it. We don’t have a call center and we don’t route you to voicemail; a live person picks up every time. We’ll tarp or secure the damaged area if needed and schedule the full repair or replacement based on what we find.
Every roof we install carries a manufacturer material warranty plus our workmanship coverage, and the whole job is backed by Ed Winslow’s 36500-Day Done Right Promise. If it’s not done right, we make it right, period. The manufacturer warranty details depend on the brand and product line you choose, and we’ll put all of it in writing before you sign anything.
Clear vehicles out of the driveway and off the street directly in front of the house, and move any fragile items away from interior walls that sit beneath the roof when possible, because the tear-off phase does produce vibration. If you have driveway gates or alarm sensors near the roofline, let our site lead know before tear-off starts. We handle the dumpster, the old material haul-off, and the daily cleanup; your job is just to keep kids and pets away from the work zone while it’s active.
Schedule Your Shingle, Tile & Metal Roofing Service in Miami Today
Your roof is the only thing between your family and the next Miami storm. Call (863) 946-5039 and you’ll speak to a live person before the second ring, day or night. We’ll schedule a free inspection, give you a written line-item quote with fixed pricing, and send a background-checked, uniformed technician to your home with no trip charge anywhere in our home county. Ed Winslow’s name is on the door and on every job we do in Miami, and we’ve been the one down the road since 2011.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Miami since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.