Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Sliding & Patio Doors: The Miami Owner’s Guide
If you own a CGI sliding glass door in Miami and a roller, track, handle, or lock has failed, we stock and install matching CGI-compatible parts. Most sliding door hardware replacements run between $125 and $380 installed, depending on whether you need a single roller assembly or a full track-and-handle rebuild. We carry the common parts on our trucks, so a Miami homeowner usually gets the door rolling again the same day we come out.
Here’s how this usually starts: your CGI slider has been taking Miami heat, salt air, and daily use for a decade. One Tuesday morning, you put your shoulder into it and the door barely budges. Or the handle turns but the latch doesn’t catch. Or you hear a grinding noise every time the door moves. That’s the moment most people call us, and it’s exactly the kind of repair Ed Winslow has been doing in Miami-Dade since 2011.
Key takeaways:
- We match parts to your specific CGI series, not “close enough” generics
- Most sliding door repairs are quoted upfront and finished the same visit
- We’re an independent service provider, not affiliated with CGI, which means we’ll tell you honestly when a quality aftermarket part makes more sense than OEM
Which CGI Models This Applies To
CGI manufactures several sliding and patio door lines that end up in Miami homes, and each series has different roller sizes, track profiles, and locking hardware. The most common we service are the Estate Collection, Targa Series, and Sentinel Series sliding glass doors, along with CGI’s impact-rated patio doors that Miami building code requires in most coastal and wind-borne debris zones.
Here’s the compatibility gotcha most people don’t know: CGI roller assemblies come in at least four different wheel diameters and two distinct axle configurations depending on the year and series. A roller from a 2012 Estate slider will not fit a 2021 Sentinel. If someone tells you a “universal” patio door roller works in every CGI door, walk away. We identify your exact part using the label on the door’s edge or jamb, plus a measurement of the roller housing. For older CGI doors where the label has worn off, we match by measuring the track depth and wheel profile. When OEM CGI parts are the right call, we source them directly. When an aftermarket equivalent from a reputable manufacturer matches or exceeds the original spec, we’ll tell you that too and price it lower.
Signs Your CGI Sliding & Patio Doors Is Failing
- Door is hard to slide or sticks mid-track. This is almost always worn rollers or a bent track, not a frame problem. Miami’s sandy soil tracks grit into the bottom rail, which grinds the nylon wheels down over time.
- Grinding or squealing when you open or close. The ball bearings inside the roller have worn out. Once metal rides on metal, the wheel starts chewing up the aluminum track, and the repair bill goes up by $80 to $150.
- Handle turns but the latch doesn’t engage or release fully. The multi-point lock linkage inside the stile has stripped or corroded. Salt air in Miami accelerates this on homes within a few miles of Biscayne Bay.
- Draft or water seepage at the sill. The weatherstripping at the bottom rail loses its compression after years of heat, or the interlocking stile has shifted. On an impact door, a failed seal also compromises the protection you paid for.
- Door lifts slightly when you pull the handle. The rollers have flattened on one side from sitting in the same position. This causes the door to ride high on the track and eventually jump the rail.
Replacement Cost & What’s Included
| Repair | Typical Installed Price in Miami |
|---|---|
| Single roller assembly (one door panel) | $125 – $190 |
| Both rollers plus track clean and align | $180 – $280 |
| Handle and latch replacement | $140 – $240 |
| Full hardware rebuild (rollers, track repair, handle, weatherstripping) | $300 – $550 |
Every quote is parts plus labor with no guessing. You’ll see the line items before we touch the door. If your repair comes in over $200, our standing $40-off-any-repair-over-$200 offer applies automatically. Seniors and veterans get 10% off, every time, no expiration. And there’s no trip charge inside our home county, so a failed CGI slider in Miami costs you nothing to have looked at.
The warranty that matters most is the one on our workmanship, backed by the 36500-Day Done Right Promise. We get it right, or we come back and fix it. That’s Ed’s name on the service ticket and on the door.
DIY or Call Us?
Sliding door rollers and tracks involve supporting a heavy glass panel. A tempered glass CGI patio door can weigh over 200 pounds. Lifting the panel out to replace a roller without proper support means risking the glass, the frame, and the fingers underneath it. The track is aluminum and bends easily under pressure, which turns a $150 roller job into a $400 track replacement. We don’t recommend pulling the panel yourself.
What you can safely do: spray the lower track with a dry silicone lubricant (not WD-40, which attracts Miami’s sand and makes wear worse), check the weep holes on the sill are clear of debris, and make note of where exactly the door binds or makes noise. Then call (863) 946-5039. We’ll give you a straight answer on the phone about what’s likely wrong and what it’ll cost to make it right.
FAQ
Plan on 8 to 14 years. Homes within a mile of salt water tend toward the shorter end because airborne salt corrodes the metal parts and leaves a fine abrasive on the track. Homes further inland in areas like Kendall or Westchester can push closer to 15 years with occasional track cleaning.
In most cases, yes. Rollers, handles, locks, weatherstripping, and even tracks are all replaceable parts. We replace the failed component and keep the original glass and frame. Call (863) 946-5039 if you want us to look at it.
A single roller swap takes under an hour. A full hardware rebuild with track work usually takes two to three hours. We arrive with the common CGI, PGT, CWS, and ES Windows parts on the truck, so most jobs are one-visit.
We stock the most common rollers, handles, and locking parts for CGI’s Miami-heavy series. If you have an unusual size, we source it fast from our supply chain and schedule the install as soon as it lands. Call (863) 946-5039 with your door’s label info and we’ll check the truck before we head out.
This is the repair where the company you pick actually matters. Get it done once by neighbors who answer the phone and stand behind the work. Call (863) 946-5039 for a free estimate on your CGI sliding door repair, or swing by and see us. We’re the one down the road.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Miami and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.