Mr-Glass Shingle, Tile & Metal Roofing Nationwide | Winslow Windows & Doors

Mr-Glass Shingle, Tile & Metal Roofing in Miami: What to Know First

We repair and replace shingle, tile, and metal roofing on Miami homes as an independent Mr-Glass service provider, and most jobs are completed within one to three days once materials are on site. The honest price posture is this: a Mr-Glass roof repair in Miami typically runs between $350 and $1,400 depending on what failed, and a full replacement on an average Miami home lands between $9,000 and $24,000 depending on material, decking condition, and roof pitch. That’s the straight answer most contractors won’t give you before they send a sales rep to your door.

Call (863) 946-5039

If you own a Mr-Glass product and your roof is leaking, lifting, or showing rust, this page will tell you exactly what’s happening and what it costs to fix. Ed Winslow has been doing this work across Miami-Dade since 2011, and our phone is answered by a live person 24/7. Call (863) 946-5039 when you’re ready to talk.

How Mr-Glass Products Fail - and How We Fix Them

Mr-Glass builds a solid product, but Miami is not a gentle place for roofing. Salt air, UV that runs 11 months a year, and hurricane-driven rain expose every weakness a product has. Here’s what we actually see in the field:

• Shingle seal strip failure on Mr-Glass architectural shingles. When the self-sealing adhesive dries out under Miami sun, the shingle tabs lay flat instead of bonding. We see this most often on roofs installed 7-12 years ago where the original sealant has baked out. The fix is a re-seal with an OEM-spec adhesive or, if the tabs are cracked, targeted shingle replacement that blends with the existing course. Most homeowners don’t know this until they find granules in the gutter after a storm.
• Tile underlayment rot on Mr-Glass barrel tile systems. The tile itself rarely fails. What fails is the underlayment beneath it - the felt or synthetic layer that does the actual waterproofing. In Miami, we routinely open up Mr-Glass tile roofs that look fine from the street but have rotted underlayment that’s been letting moisture into the decking for years. The symptom is a leak that appears nowhere near the visible tile damage. We pull the affected tile, replace the underlayment section, reset the tile, and you’d never know we were there.
• Metal roof fastener backout on Mr-Glass standing seam panels. The thermal cycling in Miami causes metal panels to expand and contract, and over time the fasteners can loosen or back out slightly. You’ll notice it as a subtle clicking sound on hot afternoons or visible screw heads lifting above the panel surface. Left alone, it creates a water path. We replace worn fasteners with neoprene-washered screws sized to the existing penetration and torque them to spec so the panel can still move without leaking.
• Flashing separation at Mr-Glass roof-to-wall transitions. On Miami homes with flat roofs or low-pitch sections, the metal flashing where Mr-Glass roofing meets a stucco wall is a repeat offender. The original sealant cracks, the flashing lifts, and water follows the wall cavity down. We remove the failed flashing, inspect the membrane beneath, and install new flashing with a proper counterflashing detail that actually sheds water instead of trapping it.
• Valley clogging and ponding on Mr-Glass tile roofs with Miami’s rainy-season volume. Tile valleys are designed to channel water, but when Miami delivers three inches of rain in two hours plus oak leaves and palm fronds, the valley becomes a dam. Water backs up under the tile edges and finds the deck. We clean and re-detail the valley, install a wider valley metal where the roofline allows it, and recommend a maintenance cadence that matches where your home sits relative to tree coverage.

Our Mr-Glass Shingle, Tile & Metal Roofing Process

Here’s how a Mr-Glass roofing job runs with us, from the first call to the final walkthrough:

1. 1
   You call. A live person answers - not a voicemail, not a call center. We ask what you’re seeing, get your address, and set the soonest appointment that works for you.
2. 2
   We diagnose. Our technician arrives in a marked truck, in uniform, with a background check already on file. We get on the roof and find the actual cause, not just the visible symptom. We’ll show you photos and explain it in plain English.
3. 3
   We price it upfront. You get a written line-item estimate before any work begins. No change orders down the road unless you ask for something extra. Senior or veteran? That’s a permanent 10% off. Repair over $200? That’s $40 off.
4. 4
   We fix it right. OEM Mr-Glass parts where they matter - sealants, underlayment, flashing profiles. Quality aftermarket only when it’s genuinely equal or better for your specific situation, and we’ll tell you which we’re using and why before we order it.
5. 5
   We test it. After the repair, we water-test the area where a water test makes sense and inspect every seam and penetration we touched. If it’s not right, it gets redone before we leave.
6. 6
   We stand behind it. Every job carries the 36500-Day Done Right Promise. If it’s not done right, we make it right. That’s Ed Winslow’s name on the invoice and on the door.

What Mr-Glass Shingle, Tile & Metal Roofing Costs in Miami

Here’s what you should expect to budget for Mr-Glass roofing work in Miami:

• Minor shingle repair (a few tabs, seal strip re-seal): $350 – $550
• Valley re-detail on tile or shingle roof: $500 – $950
• Underlayment section replacement under tile: $700 – $1,400 depending on the square footage exposed
• Metal panel fastener replacement and re-secure: $400 – $800
• Full shingle roof replacement (architectural Mr-Glass or equivalent): $9,000 – $16,000 on a typical Miami ranch or two-story
• Full tile roof replacement: $16,000 – $24,000+ depending on decking condition, pitch, and tile profile
• Full metal roof replacement: $15,000 – $22,000 for standing seam on an average Miami home

What moves the number: roof accessibility (single-story vs. two-story vs. steep tile), how much decking needs replacing once we open it up, and whether your existing Mr-Glass material can be salvaged or needs full removal. We give line-item written estimates, and the price we quote is the price you pay. Call (863) 946-5039 to schedule your free estimate.

Why Miami Homeowners Call Winslow Windows & Doors for Mr-Glass Work

Because Ed Winslow grew up in Hialeah and learned early that a bad seal didn’t just look wrong - it was a liability the first time a summer storm rolled off the Everglades. He learned construction and glazing through the building trades program at Miami Dade College, then spent years on installations across Miami-Dade before putting his own name on a truck. Now, homeowners call him when hurricane season forecasts start flashing on the news and they realize their old roofing isn’t going to hold up.

We’re also an authorized dealer for PGT, CGI, CWS, and ES Windows - so if your Mr-Glass roofing repair turns into a bigger conversation about impact protection for the whole exterior, we can handle that too without you chasing three companies. The one down the road, with a published address, a license number, and Ed’s word on every job.

FAQs