Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterAwning Windows in Miami, FL | Winslow Windows & Doors
Awning windows are top-hinged, crank-out units that let you keep fresh air moving through your Miami home even when the afternoon rains roll in. The sash opens outward from the bottom, creating a sloped shield that sheds water away from the opening while still allowing ventilation. For Florida homeowners, that combination of airflow and rain protection is the whole point. Winslow Windows & Doors supplies and installs awning windows across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, with laminated impact glass and frames built to High-Velocity Hurricane Zone requirements. We’ve installed these throughout Miami, from Coral Gate to Shenandoah to The Roads, and we’ll help you spec the right design pressure for your building’s wind zone. Call (863) 946-5039 to talk through your project.
Product Overview - Awning Windows
In hurricane-prone construction, the awning window earns its place because of how it behaves under pressure. The sash closes against the frame from the outside, so when wind pushes against the glass, it presses the panel tighter into its weatherstripping rather than trying to blow it inward. That’s a genuine structural advantage over sliding or single-hung profiles in coastal Miami conditions. Architecturally, awning windows work well in places where you want light and air but don’t have room for a swinging casement, like over kitchen sinks, in bathrooms, along stairwells, or stacked in transom rows above fixed glass. They’re also common in mid-century and modern Miami homes where clean horizontal lines matter.
The frames are extruded aluminum or vinyl, depending on the line you choose. Aluminum gives you narrower sightlines and a more architectural profile, which suits a lot of Coral Gables and Coconut Grove homes. Vinyl offers a softer look and very low maintenance. Inside the sash sits laminated impact glass with a PVB interlayer, the same safety-and-impact technology used in our full impact window and door line. When closed and locked, the unit forms a weathertight seal engineered for Florida Building Code High-Velocity Hurricane Zone performance. When open, the top hinge keeps rain on the outside while letting air move through the room. Call (863) 946-5039 to discuss which frame material makes sense for your openings.
Technical Specifications
- Frame materials: Extruded aluminum or multi-chamber vinyl, selected per product line and opening size.
- Impact glazing: Laminated impact glass with a PVB (polyvinyl butyral) interlayer is the standard for our Miami impact-rated awning windows.
- Additional glass options: Low-E insulated glass for thermal performance, tinted glass for glare and heat control, or clear glass for maximum visible light.
- Finish options: White, almond, bronze, black, and tan across the available lines.
- Screen options: Fixed screen or retractable screen, depending on configuration and series.
- Design pressure: Matched to your wind zone, rated up to +/-100 PSF and never higher than what your building actually requires.
- Operation: Top-hinged sash with a crank or lever operator that opens outward from the bottom.
- Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration; engineered to FBC HVHZ requirements.
Hurricane & Compliance Performance
Every impact-rated product we sell in Miami has to earn its place with documentation, not just marketing language. Here’s what sits behind the awning windows we install.
Laminated Impact Glass
Laminated Impact Glass – two panes of glass bonded to a PVB interlayer. When debris strikes the window, the glass may crack, but the interlayer holds the broken pieces in the frame. The opening stays sealed, which is what protects your home from wind-driven rain and pressure changes during a storm.
Miami-Dade NOA / Florida Product Approval
Miami-Dade NOA / FL Product Approval – every configuration requires its own Notice of Acceptance or Florida Product Approval number. These are issued per size, frame, and glass combination. We’ll verify the specific approval for your quote so your permit submittal in Miami-Dade or Broward moves without surprises.
FBC / HVHZ Compliance
FBC / HVHZ Compliance – the Florida Building Code treats Miami-Dade and Broward as a High-Velocity Hurricane Zone, the strictest standard in the state. These awning windows are engineered specifically for HVHZ conditions, not just generic coastal requirements. That’s not a detail you want to get wrong in a permit review.
TAS 201 / 202 / 203 Testing Context
TAS Protocol Testing – HVHZ impact products are tested under the TAS protocol family: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading that simulates a full storm cycle, and TAS 203 for forced-entry resistance. The windows we install are tested under these protocols as part of their approval path.
Design Pressure Matched to Your Wind Zone
Design Pressure – design pressure, or DP, is the structural rating measured in pounds per square foot, not a wind speed. We match each awning window to your building’s specific wind zone, up to +/-100 PSF, and never push a higher rating than the opening needs. Over-specifying adds cost without adding safety.
Energy Performance Options
Low-E Insulated Glass – for year-round Miami heat and humidity, Low-E insulated glass is the right call on most openings. It reduces solar heat gain while the laminated impact layer handles the storm side. We’ll help you decide which glass package makes sense room by room.
Color & Glass Options
Color choice should follow the architecture of the home, not the other way around. In Miami’s older neighborhoods, Coral Gables Mediterranean and Spanish Revival homes typically carry bronze or black frames that read against stucco and clay tile. White and almond work well on mid-century ranches, Key Biscayne condos, and any home with lighter trim. Tan has a place on cream or sand-toned facades where you want the window to blend rather than frame itself. On the glass side, clear impact glass maximizes daylight, which matters in interior bathrooms and hallways. Tinted glass cuts glare, a real consideration for west-facing Miami rooms that take the full afternoon sun. Low-E insulated glass does the heavy lifting on energy performance, reflecting heat while keeping the view. We’ll bring finish samples and glass samples to your home so you’re deciding in real Miami daylight, not under showroom fluorescents.
Installation by Winslow Windows & Doors in Miami
An impact window is only as good as the opening it’s sealed into. We’ve corrected enough bad installations across Miami to say that plainly. If the frame isn’t square, if the perimeter seal fails, or if the flashing is routed wrong, you’ve compromised a NOA-rated assembly that was tested as a complete system. That’s why our installation practice follows AAMA 2400 and 2410 standards, the accepted methodology for installing windows in the field.
Every Miami project starts with a pre-install inspection of the existing opening. We check the rough opening dimensions, lintel condition, and water intrusion history before ordering anything. On install day, we set the frame level, plumb, and square within manufacturer tolerance, then seal the full perimeter with AAMA 812 low-expansion foam and a continuous sealant joint. Through-wall flashing details are tied into the building paper or WRB so water can’t find a path behind the stucco. We finish with a water test on the installed unit, then clean the site and walk you through operation, locking points, and screen removal.
Miami-specific conditions matter here. Coastal exposure means salt air, driving rain from multiple directions, and a permitting process that moves through Miami-Dade or the local municipality depending on your address. We’re familiar with the HVHZ permitting requirements, and we can support your permit submittal with the right NOA or Florida Product Approval documentation for your exact configuration. If your building is within a few blocks of Biscayne Bay or the Atlantic, we’ll also discuss corrosion-resistant hardware and frame finishes suited to salt exposure. Call (863) 946-5039 to schedule a site visit.
Frequently Asked Questions - Awning Windows
Design pressure is matched to your specific wind zone, rated up to +/-100 PSF and never higher than the opening requires. Miami-Dade and Broward fall under the High-Velocity Hurricane Zone in the Florida Building Code, and we’ll spec the configuration that meets your building’s exact requirements. Call (863) 946-5039 for a quote tailored to your address.
Lead times depend on the product line, frame finish, glass package, and whether the configuration requires a new or existing NOA. Custom sizes and less common finishes run longer. We’ll give you a realistic production window when we quote your project, and we’ll keep you posted if anything shifts. The sooner we measure, the sooner the order goes in. Call (863) 946-5039 to get started.
Yes. Miami-Dade and most HVHZ municipalities require an NOA or Florida Product Approval number for every impact-rated window in the permit submittal, and it has to match the exact size, frame, and glass configuration being installed. We provide the correct documentation with your quote and coordinate submittal with your municipality. Call (863) 946-5039 and we’ll pull the approval for your opening sizes.
In most cases, yes. Awning windows are available in a wide range of widths and heights across the lines we carry, and you can combine them with fixed windows or picture transoms for a fully custom elevation. Every custom size still requires its own NOA or Florida Product Approval verification, which we handle as part of the quote. Call (863) 946-5039 with your rough dimensions.
For coastal Miami homes, rinse the frame, track, and operator with fresh water a few times a year to clear salt residue, then dry with a soft cloth. Keep the track free of sand and leaves, and lightly lubricate the crank mechanism with a dry silicone spray. If you live within direct salt spray of the ocean, do this monthly during the dry season. Warranty information on materials and labor for qualifying lines is available on your quote.
Get a Quote - Awning Windows in Miami
Replacing windows in Miami is a decision you’ll live with for decades. Get it right the first time with a team that installs to AAMA 2400/2410 practice, pulls the right NOA documentation, and answers the phone when you call. We’ll measure your openings, walk you through frame and glass options, and deliver a written line-item quote. Call (863) 946-5039 to schedule your free on-site measurement and start your awning window project.
Written by the team at Winslow Windows & Doors, installing impact-rated windows and doors throughout Miami, FL.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Winslow Windows & Doors Services
What Neighbors Say About Winslow Windows & Doors
Detailed Images
